Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Lubricant On Tuning Condenser
#3

Any lithium white grease.

I bought mine in an automotive store.

I applied it in two places where the shaft actually goes in the stator and is held by those two metal spring clips.
Put some both where the shaft rubs against the stator AND where it rubs against the metal springs.

Both at the front and the back.
There are no other friction points.

You will feel the difference right away.


Messages In This Thread
Lubricant On Tuning Condenser - by Pepperoni - 03-22-2012, 04:35 PM
RE: Lubricant On Tuning Condenser - by morzh - 03-22-2012, 07:29 PM
RE: Lubricant On Tuning Condenser - by Pepperoni - 03-22-2012, 10:41 PM
RE: Lubricant On Tuning Condenser - by morzh - 03-23-2012, 01:00 PM
RE: Lubricant On Tuning Condenser - by Pepperoni - 03-23-2012, 10:58 AM
RE: Lubricant On Tuning Condenser - by Pepperoni - 03-23-2012, 04:22 PM
RE: Lubricant On Tuning Condenser - by morzh - 03-23-2012, 07:23 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>