Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

37-116 odd problem, even odder fix.
#1

This thing would not stay aligned. Would align it and 790 would be dead on a few days later it was at 840, next day 870 and jumped to 910 while I was listening to it. WWV(H) went from 15 to 15.4. Icon_eek

Tried to realign it several times but it would jump again.

Was about ready to take the RF subchassis out. Thought I would try measuring the LO at the grid cap of the mixer (6L7G) LO freq looked ok Icon_crazy so why wont it work??? Woops now 790 is at 730!!

So I replaced the wire from the tuning gang to the grid of the 6L7G and realigned it and its stable and dead on on all bands. Seems the solder joint was bad on the grid cap connector, and the LO didn't like the changing load.

6' of wire for an antenna and I was listening to the voice of Russia on 15.425 (great classical music) and at dusk I was getting WWV and WWVH at the same time on 5 and 15 MHz. Wonder what this would do with a proper antenna?

John
Las Vegas, NV USA


Messages In This Thread
37-116 odd problem, even odder fix. - by LASJayhawk - 04-07-2012, 12:03 AM



Users browsing this thread:
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 2877 online users. [Complete List]
» 1 Member(s) | 2876 Guest(s)
Avatar

>