Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1936 Packard Radio
#2

(04-12-2012, 03:30 PM)7estatdef Wrote:  Hi Guys
I was talking with a chap who has a nice Packard he is restoring and he was looking to have some radio done. Never wanting to turn down a buck I offered. This is what I've got radio sez PH-122 and could find it in Riders but did find a model PHXD that sure looks like it. It's a nice set for '36 and want to do a good job for guy. So are they the same???
Tnx much
Terry

Will check my archives tonight. Many 30s Philco auto radios looked very similar. Will see if I have the Philco Model PH-122. Some were OEM and some were aftermarket, even then.

Chuck


Messages In This Thread
1936 Packard Radio - by 7estatdef - 04-12-2012, 03:30 PM
RE: 1936 Packard Radio - by Chuck Schwark - 04-12-2012, 04:33 PM
RE: 1936 Packard Radio - by Chuck Schwark - 04-12-2012, 10:25 PM
RE: 1936 Packard Radio - by BILL - 04-13-2012, 08:52 AM
RE: 1936 Packard Radio - by 7estatdef - 05-07-2012, 10:22 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM

[-]
Who's Online
There are currently 5181 online users. [Complete List]
» 1 Member(s) | 5180 Guest(s)
Avatar

>