Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Proud new owner of a 37-690
#1

Over the past few years I've seen a few lucky collectors pick up this amazing set - never thought I'd be one of them though.

A little background first. I work from home as a programmer. Mostly developing websites and smart phone apps. Well, a couple weeks ago I found myself committed to a full week of online remote training via skype. So I was pretty much chained to my desk 8 hrs a day. However, while I could see them, they couldn't see what I was doing so I couldn't resist poking around on craigslist. Imagine my surprise when I saw a 37-690 for sale just a few miles away! Just one problem - I can't go get it Icon_sad

I put the mic on mute and made a quick call to another local collector and good friend. Turns out he has the day off but is elbow deep swapping parts between a couple vintage Coronados with his brother. I finally convinced (bribed) them to drop what they were doing and go get it - if it was even still available. Hours went by and finally I got a call back. They were waiting outside with the radio Icon_biggrin I thought they'd use their pickup, but it was out of commission so they had to use an old caddy. They had carefully wrapped it in a blanket and it actually sort fit in the trunk.

Even more amazing, my buddy, whose pretty good at negotiating, got it for half the asking price Icon_eek

They helped me carry it up two flights of stairs to my back porch and here it finally is!

The finish on the outside is flaking off at the slightest touch, but the veneer is very sound as are all the joints.
[Image: http://farm8.staticflickr.com/7060/70788...9400_z.jpg]

The insides look like no one has messed with anything Icon_smile
[Image: http://farm6.staticflickr.com/5192/69327...7fcf_z.jpg] [Image: http://farm6.staticflickr.com/5442/69327...9388_z.jpg]

[Image: http://farm8.staticflickr.com/7236/69327...403a_z.jpg] [Image: http://farm8.staticflickr.com/7230/69327...7ac4_z.jpg]


Messages In This Thread
Proud new owner of a 37-690 - by Bob Andersen - 04-27-2012, 08:56 PM
RE: Proud new owner of a 37-690 - by LASJayhawk - 04-27-2012, 09:00 PM
RE: Proud new owner of a 37-690 - by Bob Andersen - 04-27-2012, 09:02 PM
RE: Proud new owner of a 37-690 - by ipwizard - 04-27-2012, 11:25 PM
RE: Proud new owner of a 37-690 - by Arran - 04-27-2012, 11:37 PM
RE: Proud new owner of a 37-690 - by Bob Andersen - 04-27-2012, 11:49 PM
RE: Proud new owner of a 37-690 - by Arran - 05-01-2012, 01:42 AM
RE: Proud new owner of a 37-690 - by Arran - 04-27-2012, 09:04 PM
RE: Proud new owner of a 37-690 - by TA Forbes - 04-27-2012, 09:17 PM
RE: Proud new owner of a 37-690 - by TA Forbes - 04-27-2012, 09:20 PM
RE: Proud new owner of a 37-690 - by Bob Andersen - 04-27-2012, 10:18 PM
RE: Proud new owner of a 37-690 - by Arran - 04-27-2012, 11:39 PM
RE: Proud new owner of a 37-690 - by Bob Andersen - 04-28-2012, 12:12 AM
RE: Proud new owner of a 37-690 - by w4rtc - 04-28-2012, 01:01 AM
RE: Proud new owner of a 37-690 - by Jayce - 04-28-2012, 09:03 PM
RE: Proud new owner of a 37-690 - by Bob Andersen - 04-29-2012, 12:25 AM
RE: Proud new owner of a 37-690 - by Arran - 05-01-2012, 01:28 AM
RE: Proud new owner of a 37-690 - by Bob Andersen - 04-29-2012, 02:02 PM
RE: Proud new owner of a 37-690 - by LASJayhawk - 04-29-2012, 07:50 PM
RE: Proud new owner of a 37-690 - by Ron Ramirez - 04-29-2012, 08:42 PM
RE: Proud new owner of a 37-690 - by Tom Hamilton - 05-02-2012, 01:41 AM
RE: Proud new owner of a 37-690 - by Bob Andersen - 05-02-2012, 10:18 PM
RE: Proud new owner of a 37-690 - by Ron Ramirez - 05-03-2012, 04:34 AM
RE: Proud new owner of a 37-690 - by Bob Andersen - 05-15-2012, 12:55 PM
RE: Proud new owner of a 37-690 - by PhilcoMike - 05-16-2012, 01:59 PM
RE: Proud new owner of a 37-690 - by Bob Andersen - 05-16-2012, 05:06 PM
RE: Proud new owner of a 37-690 - by Arran - 05-16-2012, 09:14 PM
RE: Proud new owner of a 37-690 - by PhilcoMike - 05-17-2012, 02:07 PM
RE: Proud new owner of a 37-690 - by Bob Andersen - 01-31-2013, 11:38 AM
RE: Proud new owner of a 37-690 - by 7estatdef - 01-31-2013, 05:01 PM
RE: Proud new owner of a 37-690 - by Bob Andersen - 11-24-2014, 02:43 PM
RE: Proud new owner of a 37-690 - by morzh - 11-24-2014, 02:51 PM
RE: Proud new owner of a 37-690 - by KCMike - 11-24-2014, 03:22 PM
RE: Proud new owner of a 37-690 - by Arran - 11-25-2014, 04:48 AM
RE: Proud new owner of a 37-690 - by Bob Andersen - 11-25-2014, 11:26 AM
RE: Proud new owner of a 37-690 - by Ron Ramirez - 11-25-2014, 09:08 PM
RE: Proud new owner of a 37-690 - by Arran - 11-26-2014, 12:35 AM
RE: Proud new owner of a 37-690 - by Bob Andersen - 11-28-2014, 04:23 PM
RE: Proud new owner of a 37-690 - by Geoff - 12-09-2014, 01:27 AM
RE: Proud new owner of a 37-690 - by Bob Andersen - 03-10-2017, 02:09 PM
RE: Proud new owner of a 37-690 - by Bob Andersen - 03-10-2017, 02:12 PM
RE: Proud new owner of a 37-690 - by PhilcoJohn - 03-10-2017, 06:34 PM
RE: Proud new owner of a 37-690 - by Tim Tress - 08-21-2017, 06:55 PM
RE: Proud new owner of a 37-690 - by RadioSvit - 09-04-2017, 03:10 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4243 online users. [Complete List]
» 1 Member(s) | 4242 Guest(s)
Avatar

>