12-26-2006, 12:00 PM
Stude,
Cleaning out the metal cam caps is as easy as the bakelite blocks. Just heat it up enough to pull ALL the guts out and re-stuff accordingly. There is usually a common wire to the inside of the metal case you need to be aware of, depending on the can's wiring. See the bakelite block re-building page on my site.
Cleaning out the metal cam caps is as easy as the bakelite blocks. Just heat it up enough to pull ALL the guts out and re-stuff accordingly. There is usually a common wire to the inside of the metal case you need to be aware of, depending on the can's wiring. See the bakelite block re-building page on my site.
Chuck Schwark,
The Philco Repair Bench
[Image: http://www.philcorepairbench.com/images/philog3tiny.gif]
http://www.philcorepairbench.com