Philco 66 - Sweet Music at Last!!
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Thanks Mortzh, for vindicating my stupidity. Yes Joe, in case you did some wiring changes please check resistance from the white wire on the speaker plug female connector, you can unplug the speaker if you wish, to the plate of your 75. Should be about 140K. (2X70K) I suspect it will read infinity. Need some B+ up there. You have to get that white wire (trace where it goes to the 44 screen hooked up to the bottom the 70K resistor string or the + of the second 8mfd cap. Hope it will work! Would be my first help in getting something up and running on a Phorum. I think like Mortzh, they missed the dot. Hopefully you will have a working amp at this point and able to check other things. Just give a measurement on plate voltage and see if it does't pop up. If you have some little jumper wires, just hook one up between the two points to see what happens.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
(This post was last modified: 05-27-2012, 06:28 PM by jerryhawthorne.)
Messages In This Thread
RE: Philco 66 - Coil troubles? - by jerryhawthorne - 05-27-2012, 06:22 PM
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Need to purchase some accessories for restoration of my Old Philco Radio
|
| Hi Paulo,
Welcome to the Philco Phorum.
I can see why you want to find good reproduction parts. That is a bea...MrFixr55 — 11:10 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| Tim,
I have some bakelite sockets in my work shop that I can dig up. I believe quite a few are NOS. I will take photo...RodB — 10:03 PM |
|
Philco 610B oscillator wiring
|
| > The cathode as noted is wired directly to the ground side of the heater filament for that tube, not to the #17 and ...Radioroslyn — 08:12 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| Tim;
I noticed your post a little late, but I would take one of the junk sockets and try to break a chunk out of it wi...Arran — 08:07 PM |
|
Need to purchase some accessories for restoration of my Old Philco Radio
|
| Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM |
|
First Radio restoration
|
| Hi Tubeman,
Welcome to the Philco Phorum. Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM |
|
First Radio restoration
|
| You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM |
|
Zenith H725
|
| Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately.
More ...EdHolland — 10:18 AM |
|
Graphics for majestic 1050 dial glass.
|
| Murf;
I found this thread on the ARF, the first photo has a pretty good view of the dial glass.
Regards
ArranArran — 01:12 AM |
|
Zenith H725
|
| hello Ed,
how about that speacial tape used for ducting it's like foil or how about thin piece of
aluminum roof flash...radiorich — 12:19 AM |
|
Who's Online
|
There are currently 1987 online users. [Complete List]
» 4 Member(s) | 1983 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
