Posts: 4,686
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Quote:The veneer prices ARE from Constantine's. Didn't find anything on the bay. As was suggested, I will go down to the paint store and see about getting some artists paint to see if I can match it that way.
Gene
Do you mean here? This is the species and cut they used on that cabinet, price is per square foot
http://www.constantines.com/walnut-frenchstripe.aspx
Laural Burl seems to be the closest that they currently have to the quilted blond wood they used in that cabinet, I assume it's maple, but it isn't the same.
http://www.constantines.com/laurelburl.aspx
Here is the right stuff on the usaul auction site: http://www.ebay.com/itm/Quilted-Maple-Ve...1e6ee15ab2
Regards
Arran
(This post was last modified: 06-11-2012, 06:14 PM by Arran.)
Messages In This Thread
RE: Mon UGLY 9s262 - by Arran - 06-11-2012, 05:41 PM
Users browsing this thread: 3 Guest(s)
|
Recent Posts
|
Philco 91 Speaker Replacement
|
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM |
Restoring Philco 37-604C
|
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one.
Which does not m...morzh — 01:44 PM |
Philco 38-2 Automatic Tuning
|
When you push the lever, you are supposed to rotate the disk to the desired station.
Then the magnetic tuning will acqu...morzh — 01:42 PM |
Philco 38-2 Automatic Tuning
|
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM |
Philco 91 Speaker Replacement
|
How would I go about removing the spider from the cone?dconant — 12:04 PM |
Philco 38-2 Automatic Tuning
|
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM |
Does anyone make photofinish replacements?
|
Here’s the link to the DIY photofinish section of our site:
klondike98 — 09:46 AM |
Delco car radio Peko vibrator converstion issues
|
Hi Richard,
Thx for posting the schematic. As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM |
Delco car radio Peko vibrator converstion issues
|
hello mr Fixr,
The Electro Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM |
Delco car radio Peko vibrator converstion issues
|
How about putting a choke in the power supply?
The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM |
Who's Online
|
There are currently 3064 online users. [Complete List] » 2 Member(s) | 3062 Guest(s)
|
|
|
|