Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Now I've done it...One Bucket List set FOUND!
#30

Quote:The 15/17 chassis-note the small bubbling on some of the cans.
Usually the chrome on McMurdos is pretty good vs a Scott

I've noticed that as well, there are scores of Scott chassis with pitted and bubled chrome even when the cabinet and everything else was reasonably good. I've only seen one McMurdo first hand but knew a guy in Alberta that had a half dozen Scott radios/chassis and sure enough even the good ones had a few spots here and there. I think Scott flash chromed their chassis and hardware, meaning that they skimped out on the copper and nickel plating that you would typically see on a car part, and plated the bare steel. They used to do this with cheap bicycle parts from Hong Kong and Taiwan, not uncommon for those to rust if they got wet just once. Then you have Wells Gardner made sets with chrome and they still look decent more often then not, same with Atwater Kent.
Regards
Arran


Messages In This Thread
RE: Now I've done it...One Bucket List set FOUND! - by Arran - 07-28-2012, 12:29 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently no members online.

>