[KCMike]

Thank you for that info. I plan on replacing all the caps including the rebuilding or bypassing the bakelites there are 6or7 of them. I do have a question. There are 2 metal condensor blocks in the chassis one has 7 wires comming out of it and is listed on the schematic. with the MFD. The other can listed as condensor metal can 25MFD its #55 on the schem. I was looking for a cap in that value at different sites and I can find 22or33MFD Mygoodness 24.00 for that value of cap. or am I reading something wrong and it is a .25cap? By the way the #67 can 8-8-10mfd has been bypassed and the caps to it are 2 of the ones not in the schematic. one is a10-10 tubular cap and the other is the cardboard box thatsays 8mfd these are stuffed down in the chassis side by side.I did notice that can was insulated from the chassis thats where someone disconnected the wires from the can and just soldered them together and that wire runs over to the 2 caps I just mentioned.I will have to follow up on exactly where how those cap are connected and to what. Now the #69 can ,my schem. shows it as #71 6mfd. is still hooked up. I put a ohm meter on it from the center tab to ground and no reading but I plan to replace it also.