[jerryhawthorne]

OK, working on the above chassis and found something strange. Resistor ID of #43 is listed as a 40K ohm. This is both on the schematic and on the parts list. It is well located. Either I'm reading the color code wrong on the resistor or am going brain dead. I will attach a picture of the resistor in question, to me it reads 4K and in fact it reads very close to 4K in actual resistance. Should it be a 4K as I read the value both color and resistance wise or a 40K? The resistor was certainly an original from the looks of the connection. Appreciate your help.

Jerry
Resistor
[Image: http://i303.photobucket.com/albums/nn129...sistor.jpg]

Link to schematic:

http://www.nostalgiaair.org/PagesByModel...013234.pdf