[marty]

Hi All;
Thank You, Codefox, But I already have downloaded these files, but others might need the Link.. Thank You Klondike, and I have had this as well.. Also, Your Welcome for Welcoming me to the Phorum.. And TA Thank You, That is exactly what I wanted to know.. I have a Transformer and Diode set up, But I will need to either make provisions for 2 Volt Filaments Or Change everything to the 6.3 Volt Replacements type of tubes.. Like for example from 2A7 to 6A7, even though I know that neither one of these tubes were used in this model.. Its mostly 30's, 34's and such.. Largely depending on what I find has already been done to the Set.. I have Ordered some 6 Pin tube Sockets for my 6D6 tubes.. And I have also downloaded From this Phorum Ron's article about changing the Oscillator to use a 6A7 and rewinding the coil.. Since I have built or tried to build a 6A7 Oscillator circuit on Breadboard.. So far its not working.. I will Look up and get the Schematic for the Type 44 and do some comparing..
THANK YOU Marty