Model 80 Compact alignment

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Model 80 Compact alignment

keithw
Junior Member

Posts: 30
Threads: 0
Joined: Jun 2013
City: Las Vegas NV

#13

06-26-2013, 11:19 AM

Hello Ron,

Possible of course but the repairs done to this before I got it were fairly ham fisted. (not saying mine are a lot better) The coil looks unmolested. Having a sample size of one makes this a bit more difficult. That is why I was hoping someone with experience on these could shed some light on things. I don't have a lot of experience with these old radios so I am doing a lot of poking and prodding trying to understand what is going on with them. Things are pretty straight forward for the most part but this is puzzling. I have been involved with some reverse engineering of stuff where documentation simply was not available. Approached from that angle I would report the IF on this individual radio as 230 khz. Once again, having only one is a problem. I do aplogize for being so wordy. Sometime I feel like I am writing a bunch but not saying much useful.

keithw

Find

« Next Oldest | Next Newest »

Messages In This Thread

Model 80 Compact alignment - by barshnik - 06-25-2013, 03:31 PM

RE: Model 80 Compact alignment - by keithw - 06-25-2013, 03:53 PM

RE: Model 80 Compact alignment - by 7estatdef - 06-25-2013, 05:57 PM

RE: Model 80 Compact alignment - by keithw - 06-25-2013, 06:37 PM

RE: Model 80 Compact alignment - by 7estatdef - 06-25-2013, 09:36 PM

RE: Model 80 Compact alignment - by keithw - 06-25-2013, 11:05 PM

RE: Model 80 Compact alignment - by BrendaAnnD - 06-26-2013, 12:11 AM

RE: Model 80 Compact alignment - by keithw - 06-26-2013, 12:26 AM

RE: Model 80 Compact alignment - by BrendaAnnD - 06-26-2013, 01:15 AM

RE: Model 80 Compact alignment - by Arran - 06-26-2013, 01:38 AM

RE: Model 80 Compact alignment - by keithw - 06-26-2013, 08:49 AM

RE: Model 80 Compact alignment - by Ron Ramirez - 06-26-2013, 10:44 AM

RE: Model 80 Compact alignment - by keithw - 06-26-2013, 11:19 AM

RE: Model 80 Compact alignment - by Ron Ramirez - 06-26-2013, 11:47 AM

RE: Model 80 Compact alignment - by keithw - 06-26-2013, 12:17 PM

RE: Model 80 Compact alignment - by Ron Ramirez - 06-26-2013, 12:27 PM

RE: Model 80 Compact alignment - by Mondial - 06-26-2013, 01:48 PM

RE: Model 80 Compact alignment - by 7estatdef - 06-26-2013, 06:05 PM

RE: Model 80 Compact alignment - by Ron Ramirez - 06-26-2013, 06:55 PM

RE: Model 80 Compact alignment - by keithw - 06-26-2013, 09:40 PM

RE: Model 80 Compact alignment - by barshnik - 06-26-2013, 10:35 PM

RE: Model 80 Compact alignment - by keithw - 06-27-2013, 12:12 AM

RE: Model 80 Compact alignment - by Ron Ramirez - 06-27-2013, 05:09 AM

RE: Model 80 Compact alignment - by morzh - 06-27-2013, 09:23 AM

RE: Model 80 Compact alignment - by keithw - 06-27-2013, 09:33 AM

RE: Model 80 Compact alignment - by barshnik - 06-27-2013, 10:30 PM

RE: Model 80 Compact alignment - by codefox1 - 06-28-2013, 08:06 AM

RE: Model 80 Compact alignment - by 7estatdef - 06-29-2013, 06:26 PM

RE: Model 80 Compact alignment - by keithw - 07-16-2013, 10:53 PM

View a Printable Version

Users browsing this thread: 9 Guest(s)

Recent Posts
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit. That would rem...alangard — 09:30 PM

Who's Online

There are currently 7271 online users. [Complete List]
» 1 Member(s) | 7270 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me