Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

80 Jr Troubleshooting- B+ measurements
#1

Need some help please.  Recapped an 80Jr that was playing originally (at least it pulled in one station when I went to pick it up but I asked the seller to turn it off as soon as I got there ).  Also replaced out of spec dogbone resistors.  When I power it up now, it is motorboating all across the tuning span.  Some voltages:
[Image: https://www.dropbox.com/s/jnru9hgema6p6j....jpg?raw=1]  "CORRECTED TABLE"

The strange thing is when I put a test lead on plate of the Det-Osc tube, all the motorboating stops (although I can not tune in any stations).  If I put the test lead on the cathode of the Det-Osc tube, it still motorboats, except when I tune it to one strong station we have, which then comes in clearly.  Don't have a tube tester but since it was playing originally I'm assuming they are still OK.  Any thoughts on what to try next.   Thanks!


Messages In This Thread
80 Jr Troubleshooting- B+ measurements - by klondike98 - 07-07-2013, 02:00 PM
RE: 80 Jr Troubleshooting advice - by Mondial - 07-07-2013, 02:43 PM
RE: 80 Jr Troubleshooting advice - by morzh - 07-07-2013, 03:31 PM
RE: 80 Jr Troubleshooting advice - by klondike98 - 07-07-2013, 06:35 PM
RE: 80 Jr Troubleshooting advice - by 7estatdef - 07-07-2013, 08:45 PM
RE: 80 Jr Troubleshooting advice - by klondike98 - 07-07-2013, 09:22 PM
RE: 80 Jr Troubleshooting advice - by klondike98 - 07-08-2013, 04:37 PM
RE: 80 Jr Troubleshooting advice - by 7estatdef - 07-08-2013, 06:29 PM
RE: 80 Jr Troubleshooting advice - by klondike98 - 07-10-2013, 08:48 AM
RE: 80 Jr Troubleshooting advice - by 7estatdef - 07-10-2013, 07:36 PM
RE: 80 Jr Troubleshooting advice - by klondike98 - 07-11-2013, 09:09 AM
RE: 80 Jr Troubleshooting-Solved! - by Mondial - 07-11-2013, 09:28 AM
RE: 80 Jr Troubleshooting-Solved! - by morzh - 07-11-2013, 11:14 AM
RE: 80 Jr Troubleshooting-Solved! - by klondike98 - 07-11-2013, 06:35 PM
RE: 80 Jr Troubleshooting-Solved! - by 7estatdef - 07-11-2013, 08:32 PM
RE: 80 Jr Troubleshooting-Solved! - by klondike98 - 07-12-2013, 02:33 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Value of capacitor
What is an OP?  Looks like the “OP” mistakenly typed electrolytic.  Lets forgive him.Joe Rossi — 06:31 PM
Another amp build - here I go again!
How many amps a man can have? I say, as many as the space can hold.morzh — 10:01 AM
Value of capacitor
>>>It currently has an .005 1000 volt electrolytic that is at least 40 years old. That needs to go. There i...morzh — 10:00 AM
One irritating little amp - VM 557
The VM amps were kinda weird, but as you say, they did work well until they didn't. I just got a bag full of new tube so...TV MAN — 08:56 AM
Another amp build - here I go again!
I have a pair of Mk3 Dynas and they always sounded great with plenty of punch. 6550 is the same as a KT88 except usually...TV MAN — 08:45 AM
philco predicta
As Mr. Fix says, this is a live chassis so without an isolation transformer, it can be dangerous to work on. There's goo...TV MAN — 08:33 AM
Value of capacitor
If this helps you sort it out just remember 10,000 mmfd or pf = .01 mfd. So 5,000mmfd = .005 mfd.Radioroslyn — 04:23 PM
Value of capacitor
OP here- the parts list calls for an .005 1000 volt mica. It currently has an .005 1000 volt electrolytic that is at lea...bridkarl — 02:09 PM
Value of capacitor
Maybe it's one of those paper caps that is wrapped in a mica-lookiing case.RodB — 01:51 PM
Value of capacitor
I also was wondering what the post about using polarized caps had to do with the subject? The cap is 5nF, does not exis...morzh — 10:22 AM

[-]
Who's Online
There are currently no members online.

>