Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Chassis & Cabinet Model ID?
#11

Greg

Is this an actual photo of your Radiobar, or does yours just look like this?

[Image: http://philcoradio.com/phorum/attachment.php?aid=2218]

That looks like it has a 610 or 620 chassis inside, smaller escutcheon with no provision for a shadowmeter. A 660 chassis is much larger than a 610 or 620 chassis, and needs a much taller escutcheon with a window at top for the shadowmeter screen. Plus, the shaft spacing of the 660/665 is different from the 610/620, a 660 or 665 chassis would not fit inside a Radiobar made for a 610 or 620 without some cabinet modifications.

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
Chassis & Cabinet Model ID? - by GregL - 07-21-2013, 04:42 PM
RE: Chassis & Cabinet Model ID? - by TimC - 07-21-2013, 07:49 PM
RE: Chassis & Cabinet Model ID? - by GregL - 07-21-2013, 08:18 PM
RE: Chassis & Cabinet Model ID? - by Arran - 07-21-2013, 09:43 PM
RE: Chassis & Cabinet Model ID? - by GregL - 07-21-2013, 09:48 PM
RE: Chassis & Cabinet Model ID? - by Ron Ramirez - 07-22-2013, 04:50 AM
RE: Chassis & Cabinet Model ID? - by GregL - 07-22-2013, 05:00 AM
RE: Chassis & Cabinet Model ID? - by Ron Ramirez - 07-22-2013, 06:30 AM
RE: Chassis & Cabinet Model ID? - by Arran - 07-22-2013, 07:28 AM
RE: Chassis & Cabinet Model ID? - by GregL - 07-22-2013, 09:34 AM
RE: Chassis & Cabinet Model ID? - by Ron Ramirez - 07-22-2013, 03:08 PM
RE: Chassis & Cabinet Model ID? - by GregL - 07-22-2013, 03:20 PM
RE: Chassis & Cabinet Model ID? - by Arran - 07-22-2013, 07:46 PM
RE: Chassis & Cabinet Model ID? - by Ron Ramirez - 07-22-2013, 07:48 PM
RE: Chassis & Cabinet Model ID? - by GregL - 07-23-2013, 06:21 PM
RE: Chassis & Cabinet Model ID? - by Arran - 07-24-2013, 03:45 AM
RE: Chassis & Cabinet Model ID? - by GregL - 07-24-2013, 04:01 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>