Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A Free Firestone Radio
#1

Today my want ad for a Firestone console radio on CL actually paid off. I got an email from a gentleman in Kent, OH about a 1950-51 Firestone radio he had saved from being tossed into the trash by the original family who owned it. The bad news is: the phonograph is missing, the dial light bulbs are burnt out, and it isn't quite what I hoped to find. The good news: It was free! It works quite well once a couple slow tubes catch up and, it was free! Icon_biggrin
It is a model 4-A-86 and appears to have used an earlier Voice of Music changer. The guy asked about the record player and even checked through the old house, but couldn't find that part. He was just happy to save the radio from the trash and then find it a good home. Icon_smile

No matter where you go, there you are.


Messages In This Thread
A Free Firestone Radio - by Jayce - 09-04-2013, 07:50 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM

[-]
Who's Online
There are currently 3589 online users. [Complete List]
» 3 Member(s) | 3586 Guest(s)
AvatarAvatarAvatar

>