Posts: 240
Threads: 27
Joined: Jun 2013
City: Boulder, Colorado
Hi All;
Thank You Warren and Morzh for Your added input.. Ok, On the Mica Caps..
Morzh, Just after I took out C 61, and tried it which helped quite a bit, but when I move the chassis arround from bottom side up to top side up, it did the same thing.. I took out the wire for the Tone control completely eliminating C 43..
C 39 is in the line to being done, C 38 is a Mica Cap.. C 54 Volume Control Tap is done.. C 41 is done.. C 49 is being done and C51 is coming up..
THANK YOU marty
Messages In This Thread
RE: Goes Dead, Philco 45 - by marty - 09-11-2013, 03:29 PM
Users browsing this thread: 45 Guest(s)
|
Recent Posts
|
Made mistake & did not label connection
|
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM |
Made mistake & did not label connection
|
Maybe this is starting to make some sense in my hard head. Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM |
Made mistake & did not label connection
|
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM |
Made mistake & did not label connection
|
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM |
Made mistake & did not label connection
|
Hello John,
I have been there either label got lost or was not labeled !
Sincerely Richardradiorich — 02:15 PM |
Made mistake & did not label connection
|
Sorry, it is a Philco 37-640. Does that help?--Johngeorgetownjohn — 02:14 PM |
two videos to watch VHS and history of TV
|
Hello Every,
Here are a couple videos right up my alley VHS and the history of Television .
history of VCR VHS
Hi...radiorich — 02:13 PM |
Made mistake & did not label connection
|
You haven't given us the model number of the set so I looked up the 6A8 pin assignment. Pin 8 is the cathode and pin 7 i...RodB — 01:19 PM |
Made mistake & did not label connection
|
Happy Thanksgiving all!
I have made a real bonehead mistake this time. Hope someone can help. I am trying to determi...georgetownjohn — 12:51 PM |
New Philco Repair Bench
|
Apparently there is a new Philco Repair Bench found at https://philcoradio.com/repairbench/ When I try to go to order a ...dconant — 12:00 PM |
Who's Online
|
There are currently 4823 online users. [Complete List] » 3 Member(s) | 4820 Guest(s)
|
|
|
|