Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Refinishing a Radio
#8

   

Ok change of plans. I took a good look at the cabinet today and I wasn't happy. The wood on this cabinet dried out at one time, and the grain is really expanded and deeper than I thought. The picture is a close up of the wood, so I hope you can see what I see. If I were to spray clear on this, it would look like an old radio that got refinished. That's not my goal. My goal is to bring it back to as close to what it was in 1939 as I can.

If I were going to keep this radio, I would probably just clear it and forget about it. I'm not keeping it, and I want it to be really nice for it's new owner, so we are going to fill that grain....

Normally, I would grain fill before I sprayed any toner, but it's too late now. Lacquer is very forgiving and it really doesn't make a difference, so let's get started..

The artist formerly known as Puhpow! 8)


Messages In This Thread
Refinishing a Radio - by Jamie - 09-13-2013, 02:45 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 02:50 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 02:56 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 03:52 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 04:10 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 04:44 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 07:58 PM
RE: Refinishing a Radio - by Jamie - 09-14-2013, 05:30 PM
RE: Refinishing a Radio - by Jamie - 09-14-2013, 05:39 PM
RE: Refinishing a Radio - by Jamie - 09-14-2013, 05:44 PM
RE: Refinishing a Radio - by Jamie - 09-15-2013, 11:04 AM
RE: Refinishing a Radio - by Art Hoch - 09-15-2013, 11:05 PM
RE: Refinishing a Radio - by klondike98 - 09-16-2013, 01:05 PM
RE: Refinishing a Radio - by Jamie - 09-17-2013, 06:56 AM
RE: Refinishing a Radio - by EricS - 09-17-2013, 10:02 AM
RE: Refinishing a Radio - by Jamie - 09-17-2013, 11:45 AM
RE: Refinishing a Radio - by EricS - 09-17-2013, 01:27 PM
RE: Refinishing a Radio - by Jamie - 09-17-2013, 02:41 PM
RE: Refinishing a Radio - by Jamie - 09-18-2013, 05:43 PM
RE: Refinishing a Radio - by Geoff - 09-18-2013, 07:58 PM
RE: Refinishing a Radio - by EricS - 09-18-2013, 08:14 PM
RE: Refinishing a Radio - by KCMike - 09-18-2013, 08:59 PM
RE: Refinishing a Radio - by Eric T - 09-21-2013, 01:42 PM
RE: Refinishing a Radio - by EricS - 09-21-2013, 02:08 PM
RE: Refinishing a Radio - by wireless - 09-21-2013, 08:15 PM
RE: Refinishing a Radio - by PAradiogeek - 09-21-2013, 09:27 PM
RE: Refinishing a Radio - by Jamie - 09-22-2013, 05:05 AM
RE: Refinishing a Radio - by dustyshoes - 09-25-2013, 10:19 PM
RE: Refinishing a Radio - by EricS - 10-01-2013, 07:44 PM
RE: Refinishing a Radio - by Jamie - 10-01-2013, 08:32 PM
RE: Refinishing a Radio - by EricS - 10-01-2013, 08:39 PM
RE: Refinishing a Radio - by Jamie - 10-01-2013, 08:44 PM
RE: Refinishing a Radio - by EricS - 10-01-2013, 08:51 PM
RE: Refinishing a Radio - by Jamie - 10-01-2013, 08:57 PM
RE: Refinishing a Radio - by Jamie - 10-02-2013, 09:04 AM
RE: Refinishing a Radio - by EricS - 10-02-2013, 07:29 PM
RE: Refinishing a Radio - by Ron Ramirez - 10-02-2013, 07:55 PM
RE: Refinishing a Radio - by EricS - 10-02-2013, 08:44 PM
RE: Refinishing a Radio - by Jamie - 10-02-2013, 10:54 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently no members online.

>