Thread Rating:
  • 2 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Refinishing a Radio
#32

Nope. No problem at all. You can grain fill right up to the final coat of clear if you want. The only warning I have is this - once you have a dry coat of lacquer on the wood, any additional toner will get runs a lot easier. So be careful and go easy.

Grain filler -
1. Smear it on, press into grain.. wait ten minutes
2. Gently scrape off excess... wait twenty minutes
3. Rub with burlap.

Seems complicated as heck the first time you do it, but it's easy.

The artist formerly known as Puhpow! 8)


Messages In This Thread
Refinishing a Radio - by Jamie - 09-13-2013, 02:45 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 02:50 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 02:56 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 03:52 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 04:10 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 04:44 PM
RE: Refinishing a Radio - by Jamie - 09-13-2013, 07:58 PM
RE: Refinishing a Radio - by Jamie - 09-14-2013, 05:30 PM
RE: Refinishing a Radio - by Jamie - 09-14-2013, 05:39 PM
RE: Refinishing a Radio - by Jamie - 09-14-2013, 05:44 PM
RE: Refinishing a Radio - by Jamie - 09-15-2013, 11:04 AM
RE: Refinishing a Radio - by Art Hoch - 09-15-2013, 11:05 PM
RE: Refinishing a Radio - by klondike98 - 09-16-2013, 01:05 PM
RE: Refinishing a Radio - by Jamie - 09-17-2013, 06:56 AM
RE: Refinishing a Radio - by EricS - 09-17-2013, 10:02 AM
RE: Refinishing a Radio - by Jamie - 09-17-2013, 11:45 AM
RE: Refinishing a Radio - by EricS - 09-17-2013, 01:27 PM
RE: Refinishing a Radio - by Jamie - 09-17-2013, 02:41 PM
RE: Refinishing a Radio - by Jamie - 09-18-2013, 05:43 PM
RE: Refinishing a Radio - by Geoff - 09-18-2013, 07:58 PM
RE: Refinishing a Radio - by EricS - 09-18-2013, 08:14 PM
RE: Refinishing a Radio - by KCMike - 09-18-2013, 08:59 PM
RE: Refinishing a Radio - by Eric T - 09-21-2013, 01:42 PM
RE: Refinishing a Radio - by EricS - 09-21-2013, 02:08 PM
RE: Refinishing a Radio - by wireless - 09-21-2013, 08:15 PM
RE: Refinishing a Radio - by PAradiogeek - 09-21-2013, 09:27 PM
RE: Refinishing a Radio - by Jamie - 09-22-2013, 05:05 AM
RE: Refinishing a Radio - by dustyshoes - 09-25-2013, 10:19 PM
RE: Refinishing a Radio - by EricS - 10-01-2013, 07:44 PM
RE: Refinishing a Radio - by Jamie - 10-01-2013, 08:32 PM
RE: Refinishing a Radio - by EricS - 10-01-2013, 08:39 PM
RE: Refinishing a Radio - by Jamie - 10-01-2013, 08:44 PM
RE: Refinishing a Radio - by EricS - 10-01-2013, 08:51 PM
RE: Refinishing a Radio - by Jamie - 10-01-2013, 08:57 PM
RE: Refinishing a Radio - by Jamie - 10-02-2013, 09:04 AM
RE: Refinishing a Radio - by EricS - 10-02-2013, 07:29 PM
RE: Refinishing a Radio - by Ron Ramirez - 10-02-2013, 07:55 PM
RE: Refinishing a Radio - by EricS - 10-02-2013, 08:44 PM
RE: Refinishing a Radio - by Jamie - 10-02-2013, 10:54 PM



Users browsing this thread: 15 Guest(s)
[-]
Recent Posts
HiFi (Chifi) tube amp build - but my own design.
Tim, nice write up and thanks for sharing !! Sincerely Richardradiorich — 02:47 AM
HiFi (Chifi) tube amp build - but my own design.
Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM
Shadow Meter Bulb
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM
Philco 41-608 changer coupler
3D-printing...short of machining, of course. Or molding.morzh — 05:20 PM
Philco 41-608 changer coupler
Thanks, Morzh. That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM
12' Philco
Rod, Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently. H...morzh — 12:54 PM

[-]
Who's Online
There are currently no members online.

>