[64EK26]

Thanks for the information

I have found the square and triangle marks on the three insulated lugs on the 61-0028S

My capacitance meter is struggling with measurements, these are erratic and nowhere near what I think they should be, are the three lugs on the can supposed to be common ? The dimensions of this capacitor are 1” diameter with a 2” body. I assume that this is an electrolytic ?. I will do some further leakage test at 350V DC tomorrow..

The two capacitors labelled PT. No. 4522D dimensions are 1” diameter 2” long. Capacitance readings are 1.22mF and 1.3mF. I am sure that these are paper ones.

The idea is to repot these with new capacitors as I like to get internal looking correct

I will keep the forum posted with progress and up load some photos

Thanks
Richard