Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Scott 800B: The tuner
#13

Chuck,

Not really sure they're using ferrite slugs in this, but that's one of the things I need to check out. Definitely will check for greenies. This is an interesting FM IF setup. The first IF primary is on the tuner and connected to the 1st IF secondary by a coaxial link. Amp chassis has two stages of IF amplification, followed by two stages of limiting and discriminator.

Jerry,

Thanks! That's a great idea, and I'll give it a shot. May have to buy a bunch of 0.1 disc caps, though, don't think the poly caps I have will fit in the cans.


Messages In This Thread
Scott 800B: The tuner - by BrendaAnnD - 11-11-2013, 08:58 AM
RE: Scott 800B: The tuner - by morzh - 11-11-2013, 11:57 AM
RE: Scott 800B: The tuner - by BrendaAnnD - 11-11-2013, 03:37 PM
RE: Scott 800B: The tuner - by jerryhawthorne - 11-11-2013, 09:56 PM
RE: Scott 800B: The tuner - by BrendaAnnD - 11-11-2013, 10:39 PM
RE: Scott 800B: The tuner - by Arran - 11-12-2013, 01:03 AM
RE: Scott 800B: The tuner - by jerryhawthorne - 11-12-2013, 01:43 PM
RE: Scott 800B: The tuner - by BrendaAnnD - 11-14-2013, 06:04 AM
RE: Scott 800B: The tuner - by jerryhawthorne - 11-14-2013, 01:13 PM
RE: Scott 800B: The tuner - by BrendaAnnD - 11-15-2013, 10:43 AM
RE: Scott 800B: The tuner - by Chuck Schwark - 11-15-2013, 10:54 AM
RE: Scott 800B: The tuner - by jerryhawthorne - 11-15-2013, 01:30 PM
RE: Scott 800B: The tuner - by BrendaAnnD - 11-15-2013, 08:43 PM
RE: Scott 800B: The tuner - by jerryhawthorne - 11-15-2013, 09:23 PM
RE: Scott 800B: The tuner - by BrendaAnnD - 11-17-2013, 12:55 AM
RE: Scott 800B: The tuner - by jerryhawthorne - 11-17-2013, 01:15 AM
RE: Scott 800B: The tuner - by BrendaAnnD - 11-17-2013, 01:46 AM
RE: Scott 800B: The tuner - by BrendaAnnD - 11-17-2013, 10:34 PM
RE: Scott 800B: The tuner - by jerryhawthorne - 11-17-2013, 11:35 PM
RE: Scott 800B: The tuner - by BrendaAnnD - 11-18-2013, 12:02 AM
RE: Scott 800B: The tuner - by jerryhawthorne - 11-18-2013, 12:10 AM
RE: Scott 800B: The tuner - by jerryhawthorne - 11-18-2013, 07:00 PM



Users browsing this thread: 6 Guest(s)
[-]
Recent Posts
Rusty Tuning Condenser
Thanks guys. I think I'll give the Naval Jelly a try since I can better control where it goes.dconant — 09:23 AM
Philco Model 80 Transformer resistance
Just forget this number, it is useless anyway. Simply proceed with your project.morzh — 10:08 PM
Philco Model 80 Transformer resistance
My $0.02 is that it is a misprint. I tried to look up the value for the similar 84 and 37-84, and ther is no resistance...MrFixr55 — 09:51 PM
Philco Model 80 Transformer resistance
Thanks for the quick reply! Hmm...well that's good, so what am I seeing that's 1042 ohms on the schematic for the pow...Mike L — 08:46 PM
Philco Model 80 Transformer resistance
The DC resistance of the primary is 8 to 9 Ohm.morzh — 07:54 PM
Philco Model 80 Transformer resistance
I have a feeling the primary winding on the power transformer is bad. My resistance reading on the primary side is 9 ohm...Mike L — 07:48 PM
Rusty Tuning Condenser
I would try Naval Jelly and use a soaked pipe cleaner to get it where it needs to go.RossH — 06:56 PM
38-10T chassis Restoration begins
Hello Dconant , they sold mica to use as a insulator between transistors and their heatsinks too. Rob I will remove th...radiorich — 02:52 PM
38-10T chassis Restoration begins
Thanks for the info guys. I always wondered why the use of mica. Now I know.dconant — 01:52 PM
38-10T chassis Restoration begins
Most common plastics have a dielectric constant in the 3-4 range whereas mica is around 6. This means that even if you w...Steve D — 01:46 PM

[-]
Who's Online
There are currently 4071 online users. [Complete List]
» 1 Member(s) | 4070 Guest(s)
Avatar

>