Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help ID parts Canadian Model 91H
#1

as stated in the title i have a model 91H canadian, or from what i can tell... Is there any difference in the US/ Can models? one page I came across would not give info to people asking about canadian models... whats with that?

[Image: https://dl.dropboxusercontent.com/u/1920....10.57.jpg]

From what i can tell its a 1932 model 91 highboy, with model 91 tuner with twin speakers.

I cannot find a part numbers for the twin speakers, there is a 11" and a 7" wired together with a 5 wire plug. they are ruined.

[Image: https://dl.dropboxusercontent.com/u/1920....56.31.jpg]
[Image: https://dl.dropboxusercontent.com/u/1920....56.36.jpg]
[Image: https://dl.dropboxusercontent.com/u/1920....57.03.jpg]
[Image: https://dl.dropboxusercontent.com/u/1920....57.29.jpg]
SEPT 30 1932

Heres some other pics..

The good... it lights up. nice cabinet.. er.. 75% needs work

[Image: https://dl.dropboxusercontent.com/u/1920....54.28.jpg]
[Image: https://dl.dropboxusercontent.com/u/1920....54.15.jpg]
[Image: https://dl.dropboxusercontent.com/u/1920....11.13.jpg]

The Bad... No nobs, speaker mesh, dial face, speakers
[Image: https://dl.dropboxusercontent.com/u/1920....53.50.jpg]
[Image: https://dl.dropboxusercontent.com/u/1920....55.48.jpg]
[Image: https://dl.dropboxusercontent.com/u/1920....55.36.jpg]

Wondering if it is worth fixing up to restored condition, or if i should just use the nice cabinet for a custom PC case.


Messages In This Thread
Help ID parts Canadian Model 91H - by TRusselo - 01-02-2014, 11:21 PM
RE: Help ID parts Canadian Model 91H - by morzh - 01-05-2014, 07:20 PM
RE: Help ID parts Canadian Model 91H - by Arran - 01-06-2014, 01:57 AM



Users browsing this thread: 5 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently no members online.

>