01-07-2014, 05:24 PM
Hi Mondial
I was measuring to ground and all other voltages are within a few volts of spec. I did a voltage drop mesurement on the cathode resistor and applied some ohms law and total current is 30ma so a little less than the spec says but I think that will be just fine.
Thanks
Gregb
I was measuring to ground and all other voltages are within a few volts of spec. I did a voltage drop mesurement on the cathode resistor and applied some ohms law and total current is 30ma so a little less than the spec says but I think that will be just fine.
Thanks
Gregb