Model 20A philco very poor grille, restore or replace?

Register

Guest Join Us

Hello Guest,

Please feel free to join us!
There are many more parts of the Phorum that only members can see.

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Linear Mode

Model 20A philco very poor grille, restore or replace?

Jamesm
Junior Member

Posts: 16
Threads: 2
Joined: Jan 2014
City: Newmarket Ontario, Canada

#4

01-11-2014, 04:08 PM

I don't mind putting the work I to it but it would have saved me a lot of time if someone made reproductions. Tab10672 you say that it was darker around the grille area originally? It looks to have a walnut finish. Because its so delicate, I guess I will have to take off the veneer that is missing wood under it then build up the wood underneath then re apply the veneer and replace missing pieces. Also I will have to glue it all in a press because everything intact is warped. Must have gotten wet at some point. I was surprised to find it working before its been restored electrically. That's going to happen before I work on the cabinet.

Find

« Next Oldest | Next Newest »

Messages In This Thread

Model 20A philco very poor grille, restore or replace? - by Jamesm - 01-10-2014, 01:07 PM

RE: Model 20A philco very poor grille, restore or replace? - by tab10672 - 01-11-2014, 12:43 AM

RE: Model 20A philco very poor grille, restore or replace? - by Arran - 01-11-2014, 01:57 AM

RE: Model 20A philco very poor grille, restore or replace? - by Jamesm - 01-11-2014, 04:08 PM

RE: Model 20A philco very poor grille, restore or replace? - by OldRestorer - 01-17-2014, 11:16 AM

RE: Model 20A philco very poor grille, restore or replace? - by tab10672 - 01-17-2014, 01:50 PM

RE: Model 20A philco very poor grille, restore or replace? - by Jamesm - 01-17-2014, 10:02 PM

RE: Model 20A philco very poor grille, restore or replace? - by tab10672 - 01-18-2014, 11:20 AM

RE: Model 20A philco very poor grille, restore or replace? - by dfields69 - 02-09-2014, 02:31 PM

RE: Model 20A philco very poor grille, restore or replace? - by Jamesm - 02-09-2014, 02:40 PM

RE: Model 20A philco very poor grille, restore or replace? - by Jamesm - 02-09-2014, 02:44 PM

RE: Model 20A philco very poor grille, restore or replace? - by dfields69 - 02-09-2014, 03:10 PM

RE: Model 20A philco very poor grille, restore or replace? - by Jamesm - 02-09-2014, 03:14 PM

RE: Model 20A philco very poor grille, restore or replace? - by tab10672 - 02-09-2014, 03:50 PM

RE: Model 20A philco very poor grille, restore or replace? - by Jamesm - 02-09-2014, 04:07 PM

RE: Model 20A philco very poor grille, restore or replace? - by Jamesm - 02-09-2014, 04:10 PM

RE: Model 20A philco very poor grille, restore or replace? - by Jamesm - 02-09-2014, 04:15 PM

RE: Model 20A philco very poor grille, restore or replace? - by Arran - 02-11-2014, 12:15 AM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project. O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today. Soldered one in and had a successful first power-up. No magic smoke escaped and it tunes in...glyphmon — 09:53 PM
HiFi (Chifi) tube amp build - but my own design.
Tim, you refer to “AK”. Is that Alaska or Atwater-Kent, or… JoeJoe Rossi — 11:49 AM

Who's Online

There are currently 2595 online users. [Complete List]
» 1 Member(s) | 2594 Guest(s)