01-23-2014, 07:04 PM
HI Ron
I hate to say this but, yes the cone is good but the "spider" has come unglued.
It sound o k until it turned up more than 1/4 of the way then it starts rattling. I have the radio working pretty good and the changer is going thru the cycle but the idlers are noisy and hard as a brick. But it is comming along. I have the motor for the volume control working it has a small v belt that turns the volume control (it is the smallest v belt i have ever seen) and it works fine. 
Tab
It is out of a 41-616 it is a 12" cone with the 14" frame. I have a regular 12" philco that I am using to test with but it won't fit the cabinet.
Joe
I hate to say this but, yes the cone is good but the "spider" has come unglued.
It sound o k until it turned up more than 1/4 of the way then it starts rattling. I have the radio working pretty good and the changer is going thru the cycle but the idlers are noisy and hard as a brick. But it is comming along. I have the motor for the volume control working it has a small v belt that turns the volume control (it is the smallest v belt i have ever seen) and it works fine. Tab
It is out of a 41-616 it is a 12" cone with the 14" frame. I have a regular 12" philco that I am using to test with but it won't fit the cabinet.
Joe
Joe Bratcher near Louisville, KY
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
