Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Need Advice Again: Philco 38-7 Console
#6

If it were a 38-4 in good shape then maybe 75 would be a good price, <!-- m --><a class="postlink" href="http://radioatticarchives.com/radio.php?radio=1976">http://radioatticarchives.com/radio.php?radio=1976</a><!-- m --> The 38-5 and the 38-4 are both 8 tube units with PP output. I like the dial on my 38-4 and have a few spare ones (with different station call signs on them) but many collectors don't like the funky tuning lift and set or use the strange veneer tuning by pushing and truning on the other edge. The 38-4 is a bit less "plain jane" than the 38-7, if you ever get one and need a dial I can look at my spares for the call signs you are looking for. The 38-5's are more sought after because they have the typical tuning and also have a shadow meter, http://radioatticarchives.com/radio.php?radio=1978 Keep looking and checking on ebay and put a "wanted" in the classifieds since these are common models.


Messages In This Thread
[No subject] - by 49Stude63 - 06-23-2008, 03:23 PM
[No subject] - by Michael Dennis - 06-24-2008, 09:55 AM
[No subject] - by phly guy - 06-24-2008, 10:48 AM
[No subject] - by Michael Dennis - 06-24-2008, 12:27 PM
[No subject] - by 49Stude63 - 06-24-2008, 03:43 PM
[No subject] - by Michael Dennis - 06-24-2008, 09:22 PM
[No subject] - by Texasrocker - 06-24-2008, 11:16 PM
[No subject] - by Michael Dennis - 06-25-2008, 01:09 AM
[No subject] - by gary rabbitt - 06-25-2008, 03:14 PM
[No subject] - by Michael Dennis - 06-25-2008, 03:50 PM
[No subject] - by Texasrocker - 06-27-2008, 02:24 AM
[No subject] - by Michael Dennis - 06-27-2008, 05:49 AM
[No subject] - by Texasrocker - 06-29-2008, 12:00 AM
[No subject] - by Michael Dennis - 06-29-2008, 04:12 AM
[No subject] - by Texasrocker - 07-01-2008, 01:01 AM
[No subject] - by Michael Dennis - 07-01-2008, 04:18 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4204 online users. [Complete List]
» 1 Member(s) | 4203 Guest(s)
Avatar

>