Posts: 239
Threads: 10
Joined: Dec 2013
City: Columbia, SC
I think the RF is ok, as Mondial said, if bypassing it makes little difference.
Here are the connections. Again, looking at the bottom, clockwise, lug 1 is after the bracket.
1. B+ line after the 5k resistor. .05uf bakelite capacitor 3615L. Primary of the 1st IF transformer.
2. Ground. Also connects to something up in the antenna coil.
3. Plate of the RF 44, pin 2.
4. Fat black wire from bandswitch
5. Fat red wire from bandswitch. Second gang of the tuning cap. Wire through the can to the 36 grid cap.
Do you by any chance have access to an oscilloscope you could probe around with?
(This post was last modified: 03-10-2014, 03:27 PM by skyscraper.)
Messages In This Thread
RE: Model 89 Cathedral - by skyscraper - 03-10-2014, 03:26 PM
Users browsing this thread: 4 Guest(s)
|
|
Recent Posts
|
|
54C Complete Teardown/Rebuild
|
| Hello Roy,
here is this one
sincerely Richardradiorich — 12:45 AM |
|
54C Complete Teardown/Rebuild
|
| Richard,
Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM |
|
54C Complete Teardown/Rebuild
|
| Hello roy,
here is a link to the schematic .
Sincerely Richardradiorich — 11:54 PM |
|
54C Complete Teardown/Rebuild
|
| Richard,
The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM |
|
54C Complete Teardown/Rebuild
|
| The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM |
|
54C Cabinet Refinish
|
|
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM |
|
54C Complete Teardown/Rebuild
|
| While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project. O...glyphmon — 11:07 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Hello roy,
that great news glad it worked out for you !!
Sincerely Richardradiorich — 10:50 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Safety caps arrived today. Soldered one in and had a successful first power-up. No magic smoke escaped and it tunes in...glyphmon — 09:53 PM |
|
Who's Online
|
| There are currently no members online. |
|

|