Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Gloritone 26P
#5

Those look like the correct Gloritone knobs. The cabinet is a little too light, but the radio looks to be in very nice condition. They used a fairly generic grille cloth pattern so you should be able to find something that will look pretty decent in there. I like that the original filter condenser pack is still on the chassis, often times they're missing and it leaves a big ugly hole.

I'm partial to many of the sets built in Marion too, that was a nice find.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"


Messages In This Thread
Gloritone 26P - by Groundhog74 - 03-10-2014, 09:45 PM
RE: Gloritone 26P - by Radioroslyn - 03-10-2014, 10:24 PM
RE: Gloritone 26P - by Groundhog74 - 03-11-2014, 04:48 AM
RE: Gloritone 26P - by Jamie - 03-11-2014, 06:41 AM
RE: Gloritone 26P - by Eliot Ness - 03-11-2014, 02:08 PM
RE: Gloritone 26P - by Groundhog74 - 03-12-2014, 07:42 AM
RE: Gloritone 26P - by OldRestorer - 03-12-2014, 06:34 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
schematics
Those filter caps in the cardboard tube are easy to restuff, especially the kind with the rolled over end. You don't hav...Arran — 09:56 PM
Philco Model 16 wiring question
If you have 5 wires, do this: The wires that go to thick-wire wound winding are the filament. If you do not know wha...morzh — 09:03 PM
Philco Model 16 wiring question
I recently acquired a Philco Model 16 Code 126. I removed the power transformer to place heat shrink on some very bad...bobclausen — 08:23 PM
1949 Motorola 5A9M
Hello Bob, That battery looks great nice job ! Sincerely Richardradiorich — 08:20 PM
1949 Motorola 5A9M
Yes, I plan to put a Velcro closer on the top.klondike98 — 07:28 PM
1949 Motorola 5A9M
Nice job on the battery, Bob. Can the box be opened to replace the 9 volters?RodB — 11:32 AM
Philco 46-1209 strange behavior
Thank you for the detailed response MrFixr. To clarify, the hum starts when the tubes are fully warmed up, and goes a...sq65 — 09:15 AM
Philco 46-1209 strange behavior
MrFixr The chassis, if there is no ground pin in the AC plug, due to the Y-caps from L/N to the chassis, is at 60VAC re...morzh — 08:47 AM
schematics
thanks I'll try the polar caps seperatelymseno — 07:38 AM
Philco 46-1209 strange behavior
Hi SQ55, A strange issue indeed!  Just so I have you straight, on a dim bulb you get normal operation after the set warm...MrFixr55 — 12:44 AM

[-]
Who's Online
There are currently 752 online users. [Complete List]
» 1 Member(s) | 751 Guest(s)
Avatar

>