Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Oh I think so, Will. It certainly does something for your confidence level to have tamed such a wild beast as the 'infamous' 89!
Thanks for the link. I will bookmark it... but I hope, really, really hope...I never have to use that stuff again!
Greg V.
West Bend, WI
Member WARCI.org
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Hi PittsburgTost.
The record changer looks like a Garrard or BSR (Likely Garrard). The spindles just pull out and pu...MrFixr55 — 11:57 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Hello PittsburghToast ,
Welcome aboard and it looks like gary may have something for you !
now if I dig through my se...radiorich — 11:35 PM |
Model 80 Antenna Issue?
|
You are kind of on the right path. You can touch the grid cap of the Detector/Oscillator 36 tube. I'm expecting a respon...RodB — 08:48 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Welcome to the Phorum, PittsburghToast! I found an old thread that my interest you regarding the quality and worth of P...GarySP — 08:48 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Welcome to the Phorum!
:wave:
We do not have anything on that unit in our digital library. There is a Sam's Photof...klondike98 — 08:47 PM |
Model 80 Antenna Issue?
|
I’ve replaced all the caps and resistors and the radio is working but minimal volume unless I put my hand near the re...Hamilton — 08:24 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Hi there! this is my first time posting. I recently picked up this Ford-Philco Console record player and radio at a yard...PittsburghToast — 07:28 PM |
philco predicta
|
I found that where I have the 140v B+ there is 50v and the tuner receives 235v through the orange cablecgl18 — 04:14 PM |
Philco 91 code 221
|
Chassis grounds thru rivets is another good place to look. Oh and the stator screws on the tuning cap where the leads at...Radioroslyn — 08:11 AM |
Philco 91 code 221
|
Dirty tube pins and socket, cold solder joint, stray tiny strand of wire, clean the entire area around the oscillator tu...RodB — 08:43 PM |
Who's Online
|
There are currently 1514 online users. [Complete List] » 2 Member(s) | 1512 Guest(s)
|
|
|

|