Posts: 16,533
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I think it looks good. You are not going to get all original look anyway, and then the techs of old did not care about it as much either. Heatshrink is fine.
I like the green magnet wire on the coil, looks almost misterious 
Hey, when it all works, you will forget about heatshrink and what not.
Did you also rebuild the tone control unit?
Messages In This Thread
RE: Model 89 Cathedral - by morzh - 03-24-2014, 04:41 PM
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Hi PittsburgTost.
The record changer looks like a Garrard or BSR (Likely Garrard). The spindles just pull out and pu...MrFixr55 — 11:57 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Hello PittsburghToast ,
Welcome aboard and it looks like gary may have something for you !
now if I dig through my se...radiorich — 11:35 PM |
Model 80 Antenna Issue?
|
You are kind of on the right path. You can touch the grid cap of the Detector/Oscillator 36 tube. I'm expecting a respon...RodB — 08:48 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Welcome to the Phorum, PittsburghToast! I found an old thread that my interest you regarding the quality and worth of P...GarySP — 08:48 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Welcome to the Phorum!
:wave:
We do not have anything on that unit in our digital library. There is a Sam's Photof...klondike98 — 08:47 PM |
Model 80 Antenna Issue?
|
I’ve replaced all the caps and resistors and the radio is working but minimal volume unless I put my hand near the re...Hamilton — 08:24 PM |
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
|
Hi there! this is my first time posting. I recently picked up this Ford-Philco Console record player and radio at a yard...PittsburghToast — 07:28 PM |
philco predicta
|
I found that where I have the 140v B+ there is 50v and the tuner receives 235v through the orange cablecgl18 — 04:14 PM |
Philco 91 code 221
|
Chassis grounds thru rivets is another good place to look. Oh and the stator screws on the tuning cap where the leads at...Radioroslyn — 08:11 AM |
Philco 91 code 221
|
Dirty tube pins and socket, cold solder joint, stray tiny strand of wire, clean the entire area around the oscillator tu...RodB — 08:43 PM |
Who's Online
|
There are currently 2005 online users. [Complete List] » 2 Member(s) | 2003 Guest(s)
|
|
|

|