Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

42-380 + ?? escutcheon panel
#2

The one with Bass, Volume, Bands, Tuning sounds like a 41-280.

Maybe somebody just needed to replace the brass strip for some reason and the one from the previous year was handy.

If the knob labeled "Band" feels like a rotary switch, but the chassis is labeled 42-380, then something intriguing is going on.

Edited to add: Are your escutcheons otherwise identical? The 41 and 42 escutcheons are slightly different, I think. The 41 escutcheon is completely flat, but the 42 model is raised a bit around the push buttons to allow the station identifiers to be inserted from the front.

John Honeycutt


Messages In This Thread
42-380 + ?? escutcheon panel - by irawex - 03-30-2014, 04:24 PM
RE: 42-380 + ?? escutcheon panel - by Raleigh - 03-30-2014, 10:01 PM
RE: 42-380 + ?? escutcheon panel - by irawex - 03-31-2014, 08:23 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4281 online users. [Complete List]
» 1 Member(s) | 4280 Guest(s)
Avatar

>