My New Hobby - Stereo Receivers
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Thanks Ron. I enjoy it. Took the construction in stages, as per the manual, and it took about 3-4 days. Each circuit board is a separate section and has resistance tests performed on it before adding to chassis and harnesses. Very thorough. Never let the Magic Smoke out of any components. My local Heath Store was only a few miles away, if I had roasted a small part or two. I saw one working in the demo room before I settled on the AR-29. Matched our first apt. decor. Heavy too - with generous sized power transformer. IIRC, it's 35 W. per channel. More than enough to crack plaster with 8-inch, 2-way floor speakers I had on it.
Chuck
Messages In This Thread
RE: My New Hobby - Stereo Receivers - by Chuck Schwark - 04-04-2014, 09:58 AM
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Graphics for majestic 1050 dial glass.
|
| Murf;
I found this thread on the ARF, the first photo has a pretty good view of the dial glass.
Regards
ArranArran — 01:12 AM |
|
Zenith H725
|
| hello Ed,
how about that speacial tape used for ducting it's like foil or how about thin piece of
aluminum roof flash...radiorich — 12:19 AM |
|
Zenith H725
|
| Ed;
One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM |
|
Zenith H725
|
| I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM |
|
Zenith H725
|
| The PSU filter cap arrived today (thank you USPS!) so I will work on that later.
Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM |
|
Philco 610B oscillator wiring
|
| Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM |
|
The list of my radio & TV collection!
|
| Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM |
|
Philco 42-345 Restoration/Repair
|
| Thank you MrFixr55 the issue with this radio is that the internal coil antenna is missing and there was a wire in its pl...osanders0311 — 11:34 AM |
|
Philco 610B oscillator wiring
|
| Regarding the oscillator circuit which is comprised of the 6A7's cathode, control grid, and screen grid. These elements ...Radioroslyn — 10:33 AM |
|
Philco 42-345 Restoration/Repair
|
| Hi OSanders,
First off, welcome to the Philco Phorum where Phine Phamily-Phriendly Pholks Phull of Philco Phacts and P...MrFixr55 — 08:41 AM |
|
Who's Online
|
There are currently 2395 online users. [Complete List]
» 1 Member(s) | 2394 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
