The Fisher 700-T Receiver
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Yeah, it stays lit no matter what position the function switch is in - Tape Head, Phono, Aux, any of the three FM positions...it stays lit. And, yes, I did use the same circuit for LED replacement as I used in the 440-T and 4400.
[Image: http://www.philcoradio.com/images/phorum.../led02.jpg]
The only difference is, there is a 2.7K resistor connected from the positive terminal of the 200 uF capacitor in the drawing above to ground in the 700-T.
I have the MPX board out and have partially recapped it. I'm not going to reinstall it until I order and receive those 27 uF electrolytics.
--
Ron Ramirez
Ferdinand IN
Messages In This Thread
RE: The Fisher 700-T Receiver - by Ron Ramirez - 04-06-2014, 07:59 AM
Users browsing this thread: 6 Guest(s)
|
|
Recent Posts
|
|
Philco 91 Restore Code ??
|
| I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM |
|
Philco 91 Restore Code ??
|
| Yep. 10W is probably enough.
Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM |
|
Philco 91 Restore Code ??
|
| I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM |
|
Philco 91 Restore Code ??
|
| No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM |
|
Philco 91 Restore Code ??
|
| Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM |
|
Restoring Philco 96
|
| Well, selectivity today, with stations disappearing, is not such a problem for TRF as it likely used to be.
Although wh...morzh — 01:42 PM |
|
Philco 91 Restore Code ??
|
| Mike I did that already and can't really get any kind of reading. My little Honeytek A6013L reads 0 on all scales. One s...dconant — 01:38 PM |
|
New member
|
| Well, to be frank, when it comes to radios, especially the older types, a person with no electronic background could be ...morzh — 01:33 PM |
|
Restoring Philco 96
|
| Thanks for mentioning the video you had uploaded. Somehow I missed that post. Just watched your video, and it sounds to ...jrblasde — 01:28 PM |
|
Restoring Philco 96
|
| Joseph
well, for now we will have to get by the video I have made, as the final video would not be made before I get a ...morzh — 01:04 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
