Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Picked up a 48-206
#3

From Wikipedia:

"Leatherette is a form of artificial leather, usually made by covering a fabric base with plastic. The fabric can be made of a natural or a synthetic fibre which is then covered with a soft PVC layer."

http://en.wikipedia.org/wiki/Leatherette#Leatherette

Further reading:

http://www.thefreedictionary.com/leatherette

http://ask.cars.com/2011/06/what-are-the...rette.html

http://www.bmwblog.com/2009/02/04/leathe...ou-choose/

And there's more...Bing (not Crosby in this case) is your friend. Or Google. Or DuckDuckGo. Icon_smile

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
Picked up a 48-206 - by PAradiogeek - 05-20-2014, 11:32 AM
RE: Picked up a 48-206 - by OldRestorer - 05-20-2014, 11:43 AM
RE: Picked up a 48-206 - by Ron Ramirez - 05-20-2014, 04:01 PM
RE: Picked up a 48-206 - by OldRestorer - 05-20-2014, 05:36 PM
RE: Picked up a 48-206 - by PAradiogeek - 05-20-2014, 07:50 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3637 online users. [Complete List]
» 1 Member(s) | 3636 Guest(s)
Avatar

>