07-14-2014, 08:54 AM
Yep.
I finished the resistors yesterday.
Most were way out of slec though I suspect they would still work.
Interesting: a resistor with a red body, yellow end and orange dot should be 24K, right?
All three wre 42K, 46K and 61K. I even doubted I read it right.
BTW you did well recapping, all seems correct (electrolytics, all 4 of them, power and cathode feedbacks).
The light socket - I cannto figure out from the photo what that wire goes to, and if it is connected to the frame or not, there could have been a centering insulating washer there.
I finished the resistors yesterday.
Most were way out of slec though I suspect they would still work.
Interesting: a resistor with a red body, yellow end and orange dot should be 24K, right?
All three wre 42K, 46K and 61K. I even doubted I read it right.
BTW you did well recapping, all seems correct (electrolytics, all 4 of them, power and cathode feedbacks).
The light socket - I cannto figure out from the photo what that wire goes to, and if it is connected to the frame or not, there could have been a centering insulating washer there.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
