07-29-2014, 10:29 AM
I have no problem using this setup.
You raise the output to read steady value that agrees (more or less) with the SG scale, and then lower it appropriately if needed.
I also turn off the modulating signal while setting the frequency.
And yes, both counter and SG should be warmed up for a few minutes.
You raise the output to read steady value that agrees (more or less) with the SG scale, and then lower it appropriately if needed.
I also turn off the modulating signal while setting the frequency.
And yes, both counter and SG should be warmed up for a few minutes.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
