Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Setchell-Carlson ID
#6

Ummmm....boy, that old guy has been through the wringer. It's SETCHELL-Carlson, Brian; not Stromberg, etc. They were a small outfit that made some interesting radios and Television sets. On their TV sets, the chassis was a frame, and had different parts of the set in chassis modules, bolted to the frame. It was really a nicely designed set, though not cost-effective, by a mile.

Now, back to the original question. This little puppy would have been either immediate prewar (II), or immediate postwar. If that's correct, it would possibly be in Rider. The later Rider books went into the fifties, and somewhat overlapped Sams.

Oh, BTW; that covering on the case is known as: "Airplane Luggage". That makes my guess favor prewar. Airplane luggage was not widely seen after the war, but was on a lot of stuff just before WW II. If a case (and even suitcases) was kept carefully, it can look very nice today. It is quite dated.


Messages In This Thread
Setchell-Carlson ID - by phly guy - 09-30-2008, 09:13 AM
Re: Setchell-Carlson ID - by BDM - 09-30-2008, 11:12 AM
Re: Setchell-Carlson ID - by phly guy - 10-01-2008, 11:44 PM
Re: Setchell-Carlson ID - by phly guy - 10-02-2008, 07:56 AM
Re: Setchell-Carlson ID - by BDM - 10-02-2008, 08:26 AM
Re: Setchell-Carlson ID - by Doug Houston - 10-03-2008, 09:55 PM
Re: Setchell-Carlson ID - by phly guy - 10-24-2008, 07:59 AM
Re: Setchell-Carlson ID - by phly guy - 11-15-2008, 05:55 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>