[OldRestorer]

Ok so I have pulled the giant cap block and am having a little issue.

I just want to be sure that

.05 (use.047) is black
.09 (use .1) is green
.25 (use .22) is white
.75 (use 1) is red
.2 (use .22) is black and white.


I know the red fades so hopefully I got them right. They all get tied together and grounded to the can right?

My next thing is that I don't have any 1.0 caps. Can I use a .68 cap or should I use (2) .47 caps and do they go piggy backed or in series? I always forget...

Last is the 10UF e-cap that is mounted to the side of the bottom. Should I use 160V or 450V?

Thanks
Kirk