Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Dynakit Stereo 70 Refurb
#12

Ron and Pillo69;

I made a mistake when I called the Krylon product "almost chrome" it is instead their "Premium Original Chrome" #1010 or on the bar code label 24504 01010. There is also a Dupli-Color product #CS101 their bar code 26916 33101 which is identical in color and final finish. The Krylon product comes in at least an 8oz. can while the Dupli-Color comes in an 11oz. can.
One tip on re-using spray paint, I have found that the newer cans no longer provide for being able to clear the spray nozzle on the can. So I started putting a small dab of heavy grease over the opening that seals in the volatile parts of the paint and prevents the nozzle from stopping up. To use it again, shake as usual and wipe away the grease, then do a spot spray to open the nozzle full again, then proceed to paint in the usual way. The newer cans have a feature that allows the user to spray items holding the can upside down and thus you can no longer clear the nozzle by doing so, hence my trick of sealing the nozzle with heavy grease.

Joe


Messages In This Thread
Dynakit Stereo 70 Refurb - by Joeztech - 08-24-2014, 07:01 AM
RE: Dynakit Stereo 70 Refurb - by Phlogiston - 08-24-2014, 10:01 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 08-24-2014, 10:34 AM
RE: Dynakit Stereo 70 Refurb - by codefox1 - 08-25-2014, 01:30 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 08-25-2014, 06:31 AM
RE: Dynakit Stereo 70 Refurb - by Phlogiston - 08-25-2014, 10:07 AM
RE: Dynakit Stereo 70 Refurb - by gregb - 08-25-2014, 05:15 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 08-26-2014, 04:32 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 08-30-2014, 03:45 PM
RE: Dynakit Stereo 70 Refurb - by Ron Ramirez - 08-31-2014, 07:49 AM
RE: Dynakit Stereo 70 Refurb - by Pillo69 - 08-31-2014, 10:21 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-02-2014, 09:10 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-04-2014, 08:10 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-05-2014, 01:17 PM
RE: Dynakit Stereo 70 Refurb - by Ron Ramirez - 09-05-2014, 01:44 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-05-2014, 02:09 PM
RE: Dynakit Stereo 70 Refurb - by Ron Ramirez - 09-05-2014, 02:13 PM
RE: Dynakit Stereo 70 Refurb - by Arran - 09-07-2014, 02:08 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-07-2014, 06:46 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-08-2014, 02:20 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-08-2014, 05:34 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-13-2014, 10:46 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-14-2014, 07:54 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-17-2014, 04:07 PM
RE: Dynakit Stereo 70 Refurb - by Ron Ramirez - 09-18-2014, 07:48 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-18-2014, 11:57 AM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-19-2014, 02:38 PM
RE: Dynakit Stereo 70 Refurb - by Pillo69 - 09-19-2014, 07:39 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-21-2014, 07:23 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 09-23-2014, 05:25 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 11-15-2014, 08:06 AM
RE: Dynakit Stereo 70 Refurb - by thirtiesradio - 12-22-2014, 09:04 PM
RE: Dynakit Stereo 70 Refurb - by Joeztech - 12-23-2014, 07:31 AM
RE: Dynakit Stereo 70 Refurb - by thirtiesradio - 12-23-2014, 12:53 PM
RE: Dynakit Stereo 70 Refurb - by Phlogiston - 04-18-2015, 06:36 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 16B Parts
I think the chassis is painted.morzh — 08:13 PM
Philco 38-2 Automatic Tuning
Honestrly, the original is quite acceptable and, it seems to me, can be cleaned.morzh — 08:11 PM
Philco 41-608 changer coupler
Mondial left a thread about remanufacturing thois type coupler.morzh — 08:09 PM
IF can wire size and Rubber mounts?
Are you talking about rewinding or rewiring? For rewiring, meaning runnin wires to the coil from other components, the ...morzh — 08:08 PM
12' Philco
I wonder who would be able to "no stoop" with this one.morzh — 08:05 PM
IF can wire size and Rubber mounts?
Hello PHORUM members, I am still working on restoration of my PHILCO 37-640.  I want to start with rewiring the IF ca...georgetownjohn — 06:32 PM
Philco 41-608 changer coupler
I am working on a Philco 41-608 with the gear-driven changer.  The coupling (#35-2220) between the motor assembly and th...alangard — 06:29 PM
Gilfillan Brothers Car Radio?
There is a Mission Bell model 19/19A that could be what you’re looking for, Riders vol 4. It has the tube line-up of: 0Z...Joe Rossi — 05:01 PM
Looking for verification of correct schematic.
Definitely 870044RossH — 01:12 PM
12' Philco
Wonder if the chassis was big too.daveone23 — 12:38 PM

[-]
Who's Online
There are currently 3816 online users. [Complete List]
» 2 Member(s) | 3814 Guest(s)
AvatarAvatar

>