Fading signal- need help.

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Fading signal- need help.

fields 100
Member

Posts: 228
Threads: 64
Joined: Dec 2013
City: Northbrook, IL

09-29-2014, 02:27 PM

Update. While waiting, out of nothing to do removed the metal case from the tube, which was somewhat loose.
All 8 pins were unsoldered (!), and the case came off quite freely. Re-soldered all 8 of them. All voltages are good and the set plays. The problem solved.

(This post was last modified: 09-29-2014, 02:28 PM by fields 100.)

Find

« Next Oldest | Next Newest »

Messages In This Thread

Fading signal- need help. - by fields 100 - 09-28-2014, 11:34 PM

RE: Fading signal- need help. - by BrendaAnnD - 09-29-2014, 12:02 AM

RE: Fading signal- need help. - by fields 100 - 09-29-2014, 06:07 AM

RE: Fading signal- need help. - by fields 100 - 09-29-2014, 06:32 AM

RE: Fading signal- need help. - by Radioroslyn - 09-29-2014, 08:53 AM

RE: Fading signal- need help. - by Mondial - 09-29-2014, 09:11 AM

RE: Fading signal- need help. - by fields 100 - 09-29-2014, 11:39 AM

RE: Fading signal- need help. - by fields 100 - 09-29-2014, 02:27 PM

View a Printable Version

Users browsing this thread: 2 Guest(s)

Recent Posts
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM

Who's Online

There are currently 3212 online users. [Complete List]
» 3 Member(s) | 3209 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me