Silvertone dial lamps

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Silvertone dial lamps

Patrick
Senior Member

Posts: 365
Threads: 76
Joined: Oct 2014
City: Winter Haven, FL

10-17-2014, 01:39 PM

I just started rebuilding a Silvertone 101.614 chassis. The triple capacitor metal can is missing, and I know I can just replace it with three individual caps, but the three dial lamps are missing also. Does anyone know what type bulbs these are? The schematic is really hard to read. It looks like it says type 66, but I cannot find any reference to a type 66 bulb. It will be a while before I can actually power it up, so I just wanted to replace the lamps first.

Thanks in advance.

Pat

Find

« Next Oldest | Next Newest »

Messages In This Thread

Silvertone dial lamps - by Patrick - 10-17-2014, 01:39 PM

RE: Silvertone dial lamps - by jerryhawthorne - 10-17-2014, 06:54 PM

RE: Silvertone dial lamps - by Patrick - 10-17-2014, 07:32 PM

RE: Silvertone dial lamps - by Carl Travis - 10-17-2014, 07:24 PM

RE: Silvertone dial lamps - by Patrick - 10-17-2014, 07:41 PM

RE: Silvertone dial lamps - by Radioroslyn - 10-17-2014, 07:57 PM

RE: Silvertone dial lamps - by Patrick - 10-17-2014, 08:21 PM

RE: Silvertone dial lamps - by jerryhawthorne - 10-17-2014, 08:22 PM

RE: Silvertone dial lamps - by Patrick - 10-17-2014, 08:44 PM

RE: Silvertone dial lamps - by Radioroslyn - 10-18-2014, 08:33 AM

RE: Silvertone dial lamps - by Patrick - 10-18-2014, 09:33 AM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM

Who's Online

There are currently 3534 online users. [Complete List]
» 2 Member(s) | 3532 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me