Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

hi new to phorum
#7

Hi Naomi,

Assuming you are located in the UK and that is where you purchased the radio, please understand that I - and many others - have written about, studied, collected, etc. chiefly USA Philco radios and we are not really that familiar with Philco's UK products. And this is only because there is virtually no information on UK Philco radios on this side of "the pond".

I generally do not like to send folks to other forums when they come here for answers, but sometimes I have to make exceptions; and this is one of those cases.

I think you may be able to learn a little more about your radio via the UK Vintage Radio Repair & Restoration forum.

http://www.vintage-radio.net/forum/index.php

I have a few UK-made Philco radios, and I think it is neat how different they are from USA Philco radios. Yours is no exception. Icon_smile

Good luck!

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
hi new to phorum - by Fienulla fairylocks - 11-27-2014, 12:14 PM
RE: hi new to phorum - by Fienulla fairylocks - 11-27-2014, 04:43 PM
RE: hi new to phorum - by JimZ - 11-27-2014, 05:03 PM
RE: hi new to phorum - by Fienulla fairylocks - 11-27-2014, 05:31 PM
RE: hi new to phorum - by Ron Ramirez - 11-27-2014, 06:04 PM
RE: hi new to phorum - by Fienulla fairylocks - 11-27-2014, 07:45 PM
RE: hi new to phorum - by Arran - 11-29-2014, 01:05 AM
RE: hi new to phorum - by Radioroslyn - 11-30-2014, 01:30 PM
hi new to phorum - by sam - 11-27-2014, 01:42 PM
RE: hi new to phorum - by Fienulla fairylocks - 11-27-2014, 04:42 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>