Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Quality of early Philco televisions.
#10

Just my 2cents, but I just restored 2 1952 models in the last year. 52-1802 and 52-2158. One has original CRT, one has basically a NOS CRT. Both have the split chassis design ( or Duplex chassis as Philco marketing actually referred to the design). These are solid performers and really pretty easy to get running again. The 2158 sat in a barn for 30 years, but luckily the Rodney's had not got after. I watch both sets probably a couple of hours every 2 weeks. They perform as well as anything I have restored, and would say near the top in performance of what's in my restored collection. Only problem with this design for was the difficulty on the bench. The way the chassis(s) is designed, it's challenge to power up outside of the cabinet. I think techs back in the day had cable setups to connect the setup out side of the cabinets for working under chassis under power and alignment. I never could figure out what I would consider a safe way to do this, but I know others guys have created jigs for the purpose. I guess I just wastn't that motivated. Regardless, my opinion, they are great performers and compare to the quality of radios they produced at the time.


Messages In This Thread
Quality of early Philco televisions. - by Jayce - 11-26-2014, 03:55 PM
RE: Quality of early Philco televisions. - by ScottTV1962 - 12-04-2014, 09:55 AM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
The engine is a B&S 23 inch cast Iron holds 2 quarts of oil. The Generator is a 4 pole 1800 rpm mine was made in 195...David — 10:51 AM
Philco 45-6365 Universal IFT Instruction Manual
Dale: Modified topic as suggested. It is not for a specific project. I found it in a box of stuff I recently purchased...GRG — 10:34 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind ... That is a MIL-5015 style connector, used in a wide v...DaleHCook — 10:19 AM
Philco P45-6365 Universal Transformer Instruction Manual
I would suggest changing the topic from "P45-6365 Universal Transformer" to "45-6365 Universal IFT."...DaleHCook — 10:08 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated. By dconant. Dittos'Jimradio — 08:01 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind, even if it's a U.S.N power supply. I have a book somewhere abo...Arran — 02:56 AM

[-]
Who's Online
There are currently 2012 online users. [Complete List]
» 3 Member(s) | 2009 Guest(s)
AvatarAvatarAvatar

>