[Ron Ramirez]

After the tedious work with coil (8), I proceeded to rewire the two IF transformers, polished their aluminum housings, and then reinstalled them in the radio.

I also installed a couple more paper caps. This set uses lots of 0.25 uF caps and I don't have any more paper shells of that value or size, so I am probably going to (horrors!) install the remaining 0.22 uF caps without paper shells.

Anyway, here's how it looks now.

[Image: http://www.philcoradio.com/images/phorum...770-41.jpg]

Left side of chassis.

[Image: http://www.philcoradio.com/images/phorum...770-42.jpg]

Middle of chassis.

[Image: http://www.philcoradio.com/images/phorum...770-43.jpg]

Right side of chassis.

[Image: http://www.philcoradio.com/images/phorum...770-44.jpg]

Back of chassis, showing the rebuilt IF transformers in place once again.

After getting all of this done, I thought it would be a good time to take a break. So I came upstairs, looked at the clock...it was after 5 pm EST! Time flies when you're having fun. So I may, or may not, do some more work to it this evening.

I still need to install a few more paper caps, restuff the electrolytics, and install them. That should be it.