Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Magic Loop Antenna Idea - Advice?
#1

I don't have space for a long wire antenna and not versed enough to know the best alternative. I just need an antenna I can use for both regular listening on one of my consoles, and simple testing for others I'm working on. I picked up a RCA 12"x12" mountable "Magic Loop" antenna in an auction and pretty cheaply. It looks pretty cool and is in great shape. I was thinking I could mount it in a good place and maybe rig it with a more universal connection for swapping out radios.

If in good operating condition, is this type antenna any good? If so, is it feasible to change the wires/connections to work with my single post antenna connections? It has 3 wires coming off the antenna and soldered onto connections on a bakelite block, then a multi-wire strap coming off the block ending with a 5-pin flat connector.

I know I could find a much better antenna, but am curious to try this unless these just don't work well. Any advice would be appreciated.

"Ignorance is bliss...'til you have to fix a radio..."


Messages In This Thread
Magic Loop Antenna Idea - Advice? - by jayoungs - 01-12-2009, 10:01 AM
Re: Magic Loop Antenna Idea - Advice? - by exray - 01-12-2009, 07:23 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 610B oscillator wiring
I don't know what you are referring to when you say "tube cathode ground". Ground is a connection to the chass...RodB — 05:56 PM
Zenith H725
Good points, Arran. I haven't encountered this problem with any other radio (all earlier vintages), so am learning here....EdHolland — 05:32 PM
Zenith H725
Ed; One thing that I will say about these is that Brand Z was considerate enough to make these mica caps easily acces...Arran — 02:34 PM
Philco 610B oscillator wiring
Do you know what run # your chassis is? It took me a while to find what you were basing updates/modification on as I did...Radioroslyn — 07:34 AM
Need to purchase some accessories for restoration of my Old Philco Radio
COLLEAGUES, Thank you all for such good and important suggestions as how to find good replacement parts. I will go fo...palonso — 07:05 AM
Zenith H725
Here's what the inside of AM IFT2 looked like, and the other pic shows the discs I made to take place of the mica and ke...EdHolland — 07:40 PM
Zenith H725
IF2 will need replacement caps. The arcing was severe enough that the mica is pitted and holed where the HT flashed over...EdHolland — 04:04 PM
My Philco 37-116 Restore
Measuring from center tap like the tube voltages show. Cap 127 is isolated from ground. Cap 127 shown in upper left of p...dconant — 08:05 AM
My Philco 37-116 Restore
Are you measuring relative to the centertap or the GND?morzh — 11:57 PM
Philco 610B oscillator wiring
Still not clear on the wiring interface between the 6A7 and oscillator. After refering to the available schematics and s...Tubester — 07:18 PM

[-]
Who's Online
There are currently no members online.

>