03-29-2015, 12:17 PM
Brenda,
If the feedback tap is "too much"on a univ. repl. transformer for the circuit (not in this original case), one can always use a simple two-resistor voltage divider between the tap and the circuit to cut it down.
Chuck
If the feedback tap is "too much"on a univ. repl. transformer for the circuit (not in this original case), one can always use a simple two-resistor voltage divider between the tap and the circuit to cut it down.
Chuck
Chuck Schwark,
The Philco Repair Bench
[Image: http://www.philcorepairbench.com/images/philog3tiny.gif]
http://www.philcorepairbench.com
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
