Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My Latest Project a Graymark 512
#1

When we moved to Texas I found this transistor radio in the bottom of a drawer hidden away for years.

A little history of the radio. If I recall correctly, I built this radio in A&P school in Pittsburgh PA. around the Summer of 1972. I believe it was a required project for the electronics course. As time goes by it was put away and forgotten.

Well lately I’ve been interested in restoring old tube radios now that I’m retired. I’m building a control line stunter and I have a little time between coats of paint. I remembered the radio and I opened it up and put in fresh batteries. Turned it on all I heard was static. Then I looked for the electrolytic caps which usually go bad after awhile. I ordered some new ones from Digi-Key and installed the 5 caps tonight. Turned it on and it plays, very loudly too!

I then cleaned it up using Scrubbing bubbles and took some pictures. It is so cool to hear that thing playing again after what 40 years!

[Image: http://i1060.photobucket.com/albums/t458...9abng7.jpg]

[Image: http://i1060.photobucket.com/albums/t458...jyabnq.jpg]

[Image: http://i1060.photobucket.com/albums/t458...dq2eu0.jpg]

[Image: http://i1060.photobucket.com/albums/t458...chtxov.jpg]

Crist


Messages In This Thread
My Latest Project a Graymark 512 - by Crist Rigotti - 04-15-2015, 10:26 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM

[-]
Who's Online
There are currently 3981 online users. [Complete List]
» 1 Member(s) | 3980 Guest(s)
Avatar

>