04-16-2015, 07:17 PM
Finished!
Selenium Power Supply Before
Power Supply After. I used a 1N5608, 3A 1KV rated diode, and a 200 ohm and an 82 ohm 5W resistor to compensate for the missing resistance of the selenium. Voltage is about 1 volt higher than normal; no problem.
Cleaned and reassembled:
Selenium Power Supply Before
Power Supply After. I used a 1N5608, 3A 1KV rated diode, and a 200 ohm and an 82 ohm 5W resistor to compensate for the missing resistance of the selenium. Voltage is about 1 volt higher than normal; no problem.
Cleaned and reassembled:
Courage will follow when Faith takes the lead.




