05-03-2015, 08:07 PM
With the warmer weather its been time to work on this cabinet again. Did some grain filling using Timbermate (walnut color). Its water soluble, so easy to mix up a slurry and spread it on, scrape it off and then lightly sand.
[Image: https://www.dropbox.com/s/4318se5iq2qehj....jpg?raw=1]
Toned the cabinet with Mohawk medium brown walnut ultra classic and the trim with black lacquer. Unfortunately when I pulled some of the tape up after the black lacquer application some of the veneer came up. Fortunately I was able to glue it back down without too much difficulty.
[Image: https://www.dropbox.com/s/mhq6rer99lx5qt....jpg?raw=1]
I think I've got the final gloss lacquer layer down now and will paint the edges of the grill cutouts with a flat black acrylic. The sunlight gives it a little more red color than what you see indoors. Final sand and rub out in a few weeks.
[Image: https://www.dropbox.com/s/ihej21mq9lw14t....jpg?raw=1]
[Image: https://www.dropbox.com/s/4318se5iq2qehj....jpg?raw=1]
Toned the cabinet with Mohawk medium brown walnut ultra classic and the trim with black lacquer. Unfortunately when I pulled some of the tape up after the black lacquer application some of the veneer came up. Fortunately I was able to glue it back down without too much difficulty.
[Image: https://www.dropbox.com/s/mhq6rer99lx5qt....jpg?raw=1]
I think I've got the final gloss lacquer layer down now and will paint the edges of the grill cutouts with a flat black acrylic. The sunlight gives it a little more red color than what you see indoors. Final sand and rub out in a few weeks.
[Image: https://www.dropbox.com/s/ihej21mq9lw14t....jpg?raw=1]
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
