|
Model 60 Tuning Condenser Shaft Slipping
01-30-2009, 09:41 AM
Be absolutely sure that the bearings and shaft of the tuning gang itself are cleaned and re-lubed and free to move by hand, otherwise the vernier assy. will slip. Old dried/caked grease in the gang shaft is usually always a culprit.
Chuck Schwark, The Philco Repair Bench [Image: http://www.philcorepairbench.com/images/philog3tiny.gif] http://www.philcorepairbench.com
« Next Oldest | Next Newest »
Messages In This Thread
Model 60 Tuning Condenser Shaft Slipping - by jayoungs - 01-29-2009, 12:18 PM
Re: Model 60 Tuning Condenser Shaft Slipping - by exray - 01-29-2009, 01:37 PM
Re: Model 60 Tuning Condenser Shaft Slipping - by jayoungs - 01-29-2009, 08:36 PM
Re: Model 60 Tuning Condenser Shaft Slipping - by Chuck Schwark - 01-30-2009, 09:41 AM
Re: Model 60 Tuning Condenser Shaft Slipping - by Chuck Schwark - 01-30-2009, 12:03 PM
Re: Model 60 Tuning Condenser Shaft Slipping - by jayoungs - 01-30-2009, 09:55 PM
Re: Model 60 Tuning Condenser Shaft Slipping - by Texasrocker - 01-31-2009, 01:48 AM
Re: Model 60 Tuning Condenser Shaft Slipping - by jayoungs - 01-31-2009, 10:22 AM
Re: Model 60 Tuning Condenser Shaft Slipping - by Ron Ramirez - 01-31-2009, 10:49 AM
Re: Model 60 Tuning Condenser Shaft Slipping - by jayoungs - 01-31-2009, 11:31 AM
Re: Model 60 Tuning Condenser Shaft Slipping - by Ron Ramirez - 01-31-2009, 11:44 AM
Re: Model 60 Tuning Condenser Shaft Slipping - by exray - 01-31-2009, 01:47 PM
Re: Model 60 Tuning Condenser Shaft Slipping - by jayoungs - 01-31-2009, 04:52 PM
Re: Model 60 Tuning Condenser Shaft Slipping - by codefox1 - 01-31-2009, 08:39 PM
Re: Model 60 Tuning Condenser Shaft Slipping - by Texasrocker - 02-01-2009, 03:26 AM
Re: Model 60 Tuning Condenser Shaft Slipping - by exray - 02-01-2009, 07:26 AM
Re: Model 60 Tuning Condenser Shaft Slipping - by jayoungs - 02-04-2009, 01:23 PM
Users browsing this thread: 3 Guest(s) |
