Parmak 1929 Help

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Parmak 1929 Help

Eric
Senior Member

Posts: 451
Threads: 85
Joined: Nov 2011
City: Cumming, GA

05-20-2015, 04:24 PM

    I have this Parmak 1929 ( no documentation that I can find) I've been ignoring for quite a while and I'm finally getting around to working on it. I have it all cleaned up checked all the coils, tubes replaced the one cap that was  5mf and replaced the wires in the harness that were crumbling. I have no experience at all with battery sets but all of the leads were marked except one. Here is what I have.
A- Black   (goes to chassis)
B+ power Blue (goes to speaker)
B+90 Brown
B+ Det Yellow
C- Grey
C+ Green   ( goes to Chassis)
And one red lead which goes to one side of the heaters the heaters would this be A+?
Also don't see a B- ?

It looks as thought I will need 3 voltages?

A, B, and C How would they be connected?
and at what voltages?
The tubes are 5v heaters 5-01A and 1-171
Any help would be greatly appreciated!

Eric

Attached Files Image(s)

(This post was last modified: 05-20-2015, 05:05 PM by Eric. Edit Reason: add pictures )

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Parmak 1929 Help - by Eric - 05-20-2015, 04:24 PM

RE: Parmak 1929 Help - by Radioroslyn - 05-20-2015, 06:00 PM

RE: Parmak 1929 Help - by Radioroslyn - 05-20-2015, 06:20 PM

RE: Parmak 1929 Help - by Eric - 05-20-2015, 09:16 PM

RE: Parmak 1929 Help - by Radioroslyn - 05-20-2015, 10:30 PM

RE: Parmak 1929 Help - by Eric - 05-21-2015, 09:31 AM

RE: Parmak 1929 Help - by Eric - 05-21-2015, 12:04 PM

RE: Parmak 1929 Help - by mikethedruid - 05-21-2015, 03:34 PM

RE: Parmak 1929 Help - by Radioroslyn - 05-21-2015, 07:09 PM

RE: Parmak 1929 Help - by mikethedruid - 05-21-2015, 07:26 PM

RE: Parmak 1929 Help - by Eric - 05-21-2015, 08:30 PM

RE: Parmak 1929 Help - by mikethedruid - 05-21-2015, 10:40 PM

RE: Parmak 1929 Help - by Radioroslyn - 05-22-2015, 06:16 AM

RE: Parmak 1929 Help - by Eric - 05-22-2015, 08:06 AM

RE: Parmak 1929 Help - by Eric - 05-22-2015, 08:40 AM

RE: Parmak 1929 Help - by mikethedruid - 05-22-2015, 10:24 AM

RE: Parmak 1929 Help - by Radioroslyn - 05-22-2015, 09:24 PM

RE: Parmak 1929 Help - by Eric - 05-23-2015, 10:26 AM

RE: Parmak 1929 Help - by mikethedruid - 05-23-2015, 12:37 PM

RE: Parmak 1929 Help - by Eric - 05-23-2015, 01:16 PM

RE: Parmak 1929 Help - by mikethedruid - 05-23-2015, 05:56 PM

RE: Parmak 1929 Help - by Eric - 05-24-2015, 10:36 AM

RE: Parmak 1929 Help - by Radioroslyn - 05-24-2015, 11:23 AM

RE: Parmak 1929 Help - by Eric - 05-25-2015, 08:38 AM

RE: Parmak 1929 Help - by Radioroslyn - 05-25-2015, 09:50 AM

RE: Parmak 1929 Help - by Eric - 05-25-2015, 12:10 PM

RE: Parmak 1929 Help - by Radioroslyn - 05-25-2015, 02:02 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum. Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

Who's Online

There are currently 2376 online users. [Complete List]
» 1 Member(s) | 2375 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me